Project List (0)
CLAMCLEAT® RACING FINE LINE PORT & STARBOARD
Aluminum| Bulk | Display | Clamcleat® # | A | B | C | Rope Size | Finish | Fastener | Weight | Std. Pack | Add to List |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 002580 | 002580-1 | CL258 (Starboard) | 2-3/4" | 1-15/16" | 13/16" | 1/8"-1/4" | Silver | #8 FH | .01 | 10 ea | |
| 002585 | 002585-1 | CL258AN (Starboard) | 2-3/4" | 1-15/16" | 13/16" | 1/8"-1/4" | Anodized | #8 FH | .01 | 10 ea | |
| 002580NC | n/a | CL258 (Starboard) | 2-3/4" | 1-15/16" | 13/16" | 1/8"-1/4" | Unfinished | #8 FH | .01 | 10 ea | |
| 002590 | 002590-1 | CL259 (Port) | 2-3/4" | 1-15/16" | 13/16" | 1/8"-1/4" | Silver | #8 FH | .05 | 10 ea | |
| 002595 | 002595-1 | CL259AN (Port) | 2-3/4" | 1-15/16" | 13/16" | 1/8"-1/4" | Anodized | #8 FH | .05 | 10 ea | |
| 002120BP | n/a | CL212BP | Backing Plate | #8 FH | .01 | 10 ea |
The tooth design allows a quick, positive lock that is easy to release, add this to its low profile and ability to hold high loads, it makes an ideal cleat for adjusting leech lines on larger sails. Use a back plate when riveting a cleat onto fabric to prevent the rivet pulling through. It can be mounted in two positions and can be sewn or riveted to the sail. Manufactured from aluminum for light weight and durable performance the CL258 & CL259 are available in two finishes: 1. CL258 & CL259 have a silver stove enamel finish for a cost effective, high quality coating. 2. CL258AN & CL259AN have a hard anodized finish to give the ultimate hard wearing surface. The nylon versions of these cleats are CL212, CL213, CL214 and CL214W. For the other side of a sail please look at the CL259 in aluminum.
